Mixed integer linear programming models for minimizing ergonomic risk dispersion in an assembly line at the Nissan Barcelona factory

• Autores: Joaquín Bautista Valhondo, Rocío Alfaro Pozo
• Localización: Dirección y organización: Revista de dirección, organización y administración de empresas, ISSN 1132-175X, Nº 65, 2018, págs. 72-89
• Idioma: inglés
• DOI: 10.37610/dyo.v0i65.529
• Enlaces
  • Texto completo
• Dialnet Métricas: 2 Citas
• Resumen

  • We present a variant of the approach to the assembly line balancing problems, with the aim of reducing the ergonomic risk for operators of mixed-model assembly lines (MILP-3). Specifically, the MILP-3 model is focused on minimizing the average range between ergonomic risk values of workstations. Using a case study from Nissan’s plant in Barcelona, not only are the differences between levels of ergonomic risk of stations reduced, but we attempt to reduce the average maximum ergonomic risk of the assembly line. The new model is compared with two others, MILP-1 and MILP-2, which minimize the average maximum ergonomic risk and the average absolute deviation of the risks, respectively.

• Referencias bibliográficas
  • 1. AlGeddawy T, ElMaraghy H (2010) Design of single assembly line for the delayed dfferentiation of product variants. Flexible Services and...
  • 2. Arjmand N, Amini M, Shirazi-Adl A, Plamondon A, Parnianpour M (2015) Revised NIOSH Lifting Equation May generate spine loads exceeding...
  • 3. Battaïa O, Dolgui A (2013) A taxonomy of line balancing problems and their solution approaches. International Journal of Production Economics...
  • 4. Bautista J, Alfaro-Pozo R (2018) A GRASP algorithm for Quota sequences with minimum work overload and forced interruption of operations...
  • 5. Bautista J, Alfaro-Pozo R, Batalla-García C (2016) Maximizing comfort in Assembly Lines with temporal, spatial and ergonomic attributes....
  • 6. Bautista J, Batalla C, Alfaro A, Cano A (2013) Extended Models for TSALBP with Ergonomic Risk Constraints. IFAC Proceedings Volumes 46(9),...
  • 7. Bautista J, Batalla-García C, Alfaro-Pozo R (2016) Models for assembly line balancing by temporal, spatial and ergonomic risk attributes....
  • 8. Bautista J, Cano A (2011) Solving mixed model sequencing problem in assembly lines with serial workstations with work overload minimisation...
  • 9. Bautista J, Companys R, Corominas A (1996) Heuristics and exact algorithms for solving the Monden problem. European Journal of Operational...
  • 10. Bautista J, Pereira J (2007) Ant algorithms for a time and space constrained assembly line balancing problem. European Journal of Operational...
  • 11. Bautista-Valhondo J (2016) Modelos y métricas para la versión robusta del Car Sequencing Problem con Flotas de vehículos especiales. Dirección...
  • 12. Bautista-Valhondo J, Alfaro-Pozo R (2018a) An expert system to minimize operational costs in mixed-model sequencing problems with activity...
  • 13. Bautista-Valhondo J, Alfaro-Pozo R (2018b) A case study at the Nissan Barcelona factory to minimize the ergonomic risk and its standard...
  • 14. Bautista-Valhondo J, Batalla-García C, Alfaro-Pozo R (2018) Comparative Models for Minimizing Ergonomic Risk in Assembly Lines. In: Viles...
  • 15. Baybars I (1986) A Survey of Exact Algorithms for the Simple Assembly Line Balancing Problem. Management Science, 32(8), 909–932. https://doi.org/10.1287/mnsc.32.8.909
  • 16. Bortolini M, Faccio M, Gamberi M, Pilati F (2017) Multi-objective assembly line balancing considering component picking and ergonomic...
  • 17. Boysen N, Fliedner M, Scholl A (2007) A classification of assembly line balancing problems. European Journal of Operational Research 183(2),...
  • 18. Boysen N, Fliedner M, Scholl A (2008) Assembly line balancing: Which model to use when? International Journal of Production Economics...
  • 19. Boysen N, Fliedner M, Scholl A (2009) Sequencing mixed-model assembly lines: Survey, classification and model critique. European Journal...
  • 20. Brandl C, Mertens A, Schlick CM (2017) Effect of sampling interval on the reliability of ergonomic analysis using the Ovako working posture...
  • 21. Chica M, Bautista J, Cordón O, Damas S (2016) A multiobjective model and evolutionary algorithms for robust time and space assembly line...
  • 22. Chica M, Bautista J, de Armas J (2018) Benefits of robust multiobjective optimization for flexible automotive assembly line balancing....
  • 23. Chica M, Cordón O, Damas S, Bautista J (2010) Multiobjective, constructive heuristics for the 1/3 variant of the time and space assembly...
  • 24. Chica M, Cordón O, Damas S, Bautista J (2013) A robustness information and visualization model for time and space assembly line balancing...
  • 25. Dolgui A, Kovalev S (2012) Scenario based robust line balancing: Computational complexity. Discrete Applied Mathematics 160(13-14), 1955-1963....
  • 26. Dörmer J, Günther HO, Gujjula R (2015) Master production scheduling and sequencing at mixed-model assembly lines in the automotive industry....
  • 27. Eynan A, Dong L (2012) Design of flexible multi-stage processes. Production and Operations Management 21(1), 194-203. https://doi.org/10.1111/j.1937-5956.2011.01240.x
  • 28. Greco S (2005) Multiple Criteria Decision Analysis: State of the Art Surveys. International Series in Operations Research & Management...
  • 29. Gurevsky E, Battaïa O, Dolgui A (2012) Balancing of simple assembly lines under variations of task processing times. Annals of Operations...
  • 30. Gurevsky E, Battaïa O, Dolgui A (2013) Stability measure for a generalized assembly line balancing problem. Discrete Applied Mathematics...
  • 31. Li J, Gao J (2014) Balancing manual mixed-model assembly lines using overtime work in a demand variation environment. International Journal...
  • 32. Manghisi VM, Uva AM, Fiorentino M, Bevilacqua V, Trotta GF, Monno G (2017) Real time RULA assessment using Kinect v2 sensor. Applied Ergonomics...
  • 33. Miltenburg J (1989) Level Schedules for Mixed-Model Assembly Lines in Just-In-Time Production Systems. Management Science 35(2), 192-207....
  • 34. Moreno A, Terwiesch C (2015) Pricing and Production Flexibility: An Empirical Analysis of the U.S. Automotive Industry. Manufacturing...
  • 35. Otto A, Battaïa O (2017) Reducing physical ergonomic risks at assembly lines by line balancing and job rotation: A survey. Computers &...
  • 36. Otto A, Scholl A (2011) Incorporating ergonomic risks into assembly line balancing. European Journal of Operational Research 212(2), 277-286....
  • 37. Papakostas N, Pintzos G, Giannoulis C, Nikolakis N, Chryssolouris G (2014) Multi-criteria Assembly Line Design under Demand Uncertainty....
  • 38. Rosecrance J, Paulsen R, Murgia L (2017) Risk assessment of cheese processing tasks using the Strain Index and OCRA Checklist. International...
  • 39. Salveson ME (1955) The assembly line balancing problem. Journal of Industrial Engineering 6(3), 18–25.
  • 40. Scholl A, Becker C (2006) State-of-the-art exact and heuristic solution procedures for simple assembly line balancing. European Journal...
  • 41. Simaria AS, Zanella de Sá M, Vilarinho PM (2009) Meeting demand variation using flexible U-shaped assembly lines. International Journal...
  • 42. Xu W, Xiao T (2011) Strategic Robust Mixed Model Assembly Line Balancing Based on Scenario Planning. Tsinghua Science & Technology...
  • 43. Yano CA, Rachamadugu R (1991) Sequencing to Minimize Work Overload in Assembly Lines with Product Options. Management Science 37(5), 572-586....