México
México
Las plantaciones forestales comerciales son una estrategia para proteger de la sobreexplotación a los bosques naturales, por lo que es importante, conocer las propiedades físicas de su madera. El objetivo del trabajo fue determinar la calidad de la madera con base en sus propiedades físicas, y la cantidad de biomasa en una plantación de Pinus engelmannii de 17 años. El diámetro normal y altura total se midió en todos los árboles encontrados en 20 sitios rectangulares de 3.0 x 6.0 m distribuidos en cuatro líneas. En cada sitio, con un taladro de Pressler se tomó un núcleo de crecimiento a 1.30 m de altura, en dos árboles dominantes. Las propiedades físicas, densidad básica (DB), contenido de humedad (CH), contracciones volumétricas totales (CVT), y punto de saturación de la fibra (PSF) se determinaron aplicando las fórmulas específicas de cada componente. La biomasa se estimó con los valores de volumen y densidad básica, además de tres ecuaciones alométricas. Los resultados indican que la DB fue de 0.379 g cm−3, CH de 199.37%, CVT de 13.63%, PSF de 39.28% y promedio de biomasa fustal de 22.79 kg. El ANOVA mostró que la sección dentro del árbol influyó de manera significativa (p < 0.05) en DB y CH, con correlación negativa (r = - 0.96). La madera de la plantación es homogénea con respecto a la DB, CH y CVT, mientras que las dos primeras variables presentaron variación radial. La biomasa presentó relación con la densidad básica y el diámetro normal.
Commercial forest plantations are a strategy to protect naturalforests from overexploitation, so it is important, to know the physical properties ofthe wood from these plantations. The objective of the work was to determine thequality of the wood based on its physical properties and wood biomass from aPinusengelmanniiplantation of 17 years. The normal diameter and total height weremeasured in all the trees found in 20 rectangular sites of 3.0 x 6.0 m distributedin four lines. At each site, with a Pressler drill, a growth core was taken at 1.30m high, in two dominant trees. Physical properties, basic density (DB), moisturecontent (MC), total volumetric shrinkage (TVC), and fiber saturation point (FSP)were determined by applying the typical formulas. The biomass was estimated withthe values of volume and basic density, in addition to three allometric equations.The results were: BD = 0.379 g cm−3, MC = 199.37%, SVT = 13.63%, FSP =39.28% and an average stem biomass of 22.79 kg. The ANOVA showed thatthe section within the tree had a significant influence (p < 0.05) on BD and MC,with a high negative correlation (r = - 0.96). The plantation wood turned out to behomogeneous with respect to BD, MC, and SVT, while the first two variables showedradial variation. The biomass showed a close relationship with the basic density andthe normal diameter